Canon LV-7295 Manuel D'Instructions

31

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. 

If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to 

project a proper image without any additional settings. (Signal formats provided in this projector are shown on page 

76.)

One of the following messages may appear when:

When the projector cannot recognize 

the connected signal conforming to the 

provided PC systems, 

Auto is displayed 

on the System Menu box and the Auto 

PC Adjustment function works to display 

proper images. If the image is not projected 

properly, a manual adjustment is required 

(pp. 33-34).

There is no signal input from the 

computer. Check the connection between 

your computer and the projector. (See 

“Troubleshooting” on p. 71.)

The preset system is manually adjusted in 

the PC adjust Menu. The adjusted data can 

be stored in 

Mode 1-10 (pp. 33-34).

PC Systems provided in this projector is 

chosen.  The projector chooses a proper 

system provided in the projector and 

displays it.  

*

Mode 1 and SVGA 1 are examples.  

PC system can also be selected manually.

Selecting Computer System Manually

Press the MENU button to display the On-Screen 

Menu. Use the Point ▲▼ buttons to select 

Input 

and then press the Point ► or the OK button.

Use the Point ▲▼ buttons to select 

System and 

then press the Point ► or the OK button.

Use the Point ▲▼ buttons to select the desired 

system and then press the OK button.

Selected system in 

the PC System Menu 

is displayed.

Systems in this dialog box 

can be selected.

Customized 

(1–10) set in the PC 

adjust Menu (pp. 

33-34).