Canon LV-7295 Manuel D'Instructions

3

Auto PC Adjustment function is provided to automatically adjust 

Fine sync, Total dots, Horizontal position and 

Vertical position to conform to your computer.

The adjusted parameters from the Auto PC 

Adjustment can be stored in the projector. Once the 

parameters are stored, the setting can be done just 

by selecting a 

Mode (1–10) in the PC System Menu 

(p.31). See also “Store” on page 34.



  • 

Fine sync, Total dots, Horizontal position 

and 

Vertical position of some computers 

cannot be fully adjusted with the Auto PC 

Adjustment function. When the image is not 

provided properly with this operation, manual 

adjustments are required (pp. 33-34).

  • The Auto PC Adjustment cannot be operated 

when 

480i, 575i, 480p, 575p, 720p, 1035i or 

1080i is selected in the PC System Menu 

     (p. 31). 

Press the MENU button to display the On-Screen 

Menu. Use the Point ▲▼ buttons to select 

adjust and then press the Point ► or the OK 

button.

Use the Point ▲▼ buttons to select 

Auto PC and 

then press the OK button.

Menu Operation

Use Point ▲▼ buttons to select 

PC and press the OK button.

Please wait... appears while the Auto 

PC adjustment is in process.