Epson L90 Manuel D’Utilisation
Rev. B
Setup 2-33
TM-L90/TM-L90 with Peeler Technical Reference Guide
With the TM-L90 peeler specification
Note:
A paper layout error occurs when the paper layout set to the printer differs from that of the loaded
paper.
paper.
❏ FEED button operational settings (TM-L90 peeler specification continuous issuing mode
only)
With the TM-L90 peeler specification, this sets the operation when FEED is pressed.
Press FEED button
Paper layout error recovery means
0 times:
No change
1 time:
Transmit the error recovery command(Since the
printer paper layout is not changed, if the correct
paper is not inserted, the paper layout error will
occur again.)
printer paper layout is not changed, if the correct
paper is not inserted, the paper layout error will
occur again.)
2 times:
Transmit the error recovery command, or recover
from the error by opening and closing the roll paper
cover.After error recovery, the printer automatically
feeds paper. To avoid the error again, reset paper
layout for the paper inserted.
from the error by opening and closing the roll paper
cover.After error recovery, the printer automatically
feeds paper. To avoid the error again, reset paper
layout for the paper inserted.
3 times:
Transmit the error recovery command, or press
FEED.After error recovery, the printer automatically
feeds paper. To avoid the error again, reset paper
layout for the paper inserted.
FEED.After error recovery, the printer automatically
feeds paper. To avoid the error again, reset paper
layout for the paper inserted.
4 times:
Transmit the error recovery command, press FEED, or
open and close the roll paper cover.After error
recovery, the printer automatically feeds paper. To
avoid the error again, reset paper layout for the
paper inserted.
open and close the roll paper cover.After error
recovery, the printer automatically feeds paper. To
avoid the error again, reset paper layout for the
paper inserted.
5 or more times:
No change
Number of times FEED is
pressed
pressed
Feed button operation
0 times:
No change
1 time:
Moves the paper to the next printing start position
(feed to the start position)
(feed to the start position)
2 times:
Moves the paper to the manual cutter position
3 or more times:
No change