Emerson MODBUS IP Manuel D’Utilisation

SCC Event Summary 

Summary of any active user alarms or faults on the SCC 

Schedule Action - ECO Mode 

This setting gives the user the ability to choose the action of a schedule 

entry to be either stop or start. 

Schedule Day of Week - ECO Mode 

This setting represents the day of the week when an associated ECO Mode 

schedule entry action will take effect. 

Schedule Hour - ECO Mode 

This setting represents the hour of the day when an associated schedule 

entry action will take effect. 

Schedule Minute - ECO Mode 

This setting represents the minute of the hour when an associated schedule 

entry action will take effect. 

Schedule Operation State - ECO Mode 

This setting gives the user the ability to either enable or disable a schedule 

entry if the action is Start. 

Service Code Active 

Service code is running 

Service Required 

Unit requires servicing. 

Static Bypass Switch 

Static Bypass Switch state - On/Off 

Static Switch Type 

Static switch type configuration 

Sum of MMS Output RMS Currents for Phase A  The sum of the multi-module system output RMS currents for phase A 
Sum of MMS Output RMS Currents for Phase B  The sum of the multi-module system output RMS currents for phase B 
Sum of MMS Output RMS Currents for Phase C  The sum of the multi-module system output RMS currents for phase C 

System Accumulated Energy 

Total accumulated energy output for the mms system, since last energy 

reset. 

System Breaker(s) Close Failure 

One or more breakers in the system failed to close 

System Breaker(s) Open Failure 

One or more breakers in the system failed to open 

System Comm Fail 

Failure of a device on the multi-module system communication bus 

System Controller Error 

System controller internal error 

System Date and Time 

The system date and time 

System Fan Failure - Redundant 

Redundant system fan failure 

System Input Current Imbalance 

System Input Currents are Imbalanced 

System Input Current Limit 

The RMS input current has reached the input current limit threshold 

System Input Frequency 

The system input frequency 

System Input Nominal Frequency 

The nominal (or rated) system input frequency 

System Input Nominal Voltage The 

nominal 

(or rated) system input voltage 

System Input Phs Rotation Error 

The power conductors on the input line are not wired to the UPS in the 

sequence preferred for the rectifier (A-B-C) 

System Input Power Problem 

The input is not qualified to provide power to the system 

System Input Power Source 

System input power source 

System Input RMS A-B 

The System Input RMS Voltage between Phase A and Phase B 

System Input RMS B-C 

The System Input RMS Voltage between Phase B and Phase C 

System Input RMS C-A 

The System Input RMS Voltage between Phase C and Phase A 

System Input RMS Current Phase A 

The system input RMS current for Phase A 

System Input RMS Current Phase B 

The system input RMS current for Phase B 

System Input RMS Current Phase C 

The system input RMS current for Phase C 

System Isolation Output Breaker (IOB) 

System isolation output breaker (IOB) 

System Load Bank Breaker (LBB) 

System load bank breaker (LBB) 

System Output Apparent Power 

The sum total apparent power of all system output phases 

System Output Breaker (UOB) 

System output breaker (UOB) 

System Output Fault 

A fault has been detected in the system output