Emerson MODBUS IP Manuel D’Utilisation

Page de 372
BACnet Communications - UPS Systems
Liebert
®
 IntelliSlot
®
 Modbus/BACnet IP
340
System Output Frequency 
The system output frequency 
System Output Low Power Factor 
The system output power factor is low, resulting in reduced output capacity 
System Output Maximum Amp Rating 
System output maximum amperage rating 
System Output Nominal Frequency 
The nominal (or rated) system output frequency 
System Output Nominal Voltage 
The nominal (or rated) system output voltage 
System Output Off 
The system output is off 
System Output Pct Power Phase A 
The system output power on phase A as a percentage of the rated capacity 
System Output Pct Power Phase B 
The system output power on phase B as a percentage of the rated capacity 
System Output Pct Power Phase C 
The system output power on phase C as a percentage of the rated capacity 
System Output Pct Pwr (VA) Phs A 
The system output apparent power on phase A as a percentage of the rated 
capacity 
System Output Pct Pwr (VA) Phs B 
The system output apparent power on phase B as a percentage of the rated 
capacity 
System Output Pct Pwr (VA) Phs C 
The system output apparent power on phase C as a percentage of the rated 
capacity 
System Output Power Factor Phs A 
The system output power factor of phase A 
System Output Power Factor Phs B 
The system output power factor of phase B 
System Output Power Factor Phs C 
The system output power factor of phase C 
System Output Power 
The sum total power of all system output phases 
System Output RMS Current Phs A 
The system output RMS current for Phase A 
System Output RMS Current Phs B 
The system output RMS current for Phase B 
System Output RMS Current Phs C 
The system output RMS current for Phase C 
System Output Voltage RMS A-B 
The system output RMS voltage between phases A and B 
System Output Voltage RMS A-N 
The system output RMS voltage between phases A and Neutral 
System Output Voltage RMS B-C 
The system output RMS voltage between phases B and C 
System Output Voltage RMS B-N 
The system output RMS voltage between phases B and Neutral 
System Output Voltage RMS C-A 
The system output RMS voltage between phases C and A 
System Output Voltage RMS C-N 
The system output RMS voltage between phases C and Neutral 
System Shutdown - EPO 
System shutdown due to Emergency Power Off (EPO) 
System Shutdown - REPO 
System shutdown due to Remote Emergency Power Off (REPO) 
System Status 
The operating status for the system 
System UPS Module Count 
Number of UPS modules in the system 
Time Remaining - ECO Mode 
Time remaining before current active ECO Mode session stops. 
Total kW Hours Saved 
Total kW hours saved by ECO Mode or Intelligent Paralleling. 
Total Number of Battery Discharges 
The total number of battery discharges. 
Total System Operating Time 
The cumulative operation time of the unit 
Trap Filter Disconnect 
Trap filter disconnect 
UPS Battery Status 
UPS battery status 
UPS Module Type 
UPS module type 
UPS Output on Bypass 
The output power is supplied by the bypass 
UPS Output Source 
UPS output source 
UPS System Output Source 
The UPS system's output power source 
User kWh Reset 
The user kWh accumulator was reset to zero by the operator. 
Table 109 Liebert NXL
 - 60Hz, UL version (Model 40) - Glossary (continued)
Data Label
Data Description