Q-Logic 59021-05 Manuel D’Utilisation

B – Command Line Interface

Set Command

59021-05 A

B-23

Sets a variety of switch and port parameters.

Admin for all keywords except Alarm Clear, Beacon, and Pagebreak which are 
available with User authority.

alarm clear
beacon [state]
config [option]
log [option]
pagebreak [state]
port [option]
setup [option]
switch [state]

alarm clear
Clears the alarm log. This keyword is available with User authority.

beacon [state]
Enables or disables the flashing of the Logged-In LEDs according to [state]. This 
keyword is available with User authority. [state] can be one of the following:

on
Enables the flashing beacon.

off
Disables the flashing beacon.

config [option]
Sets switch, port, alarm threshold, and zoning configuration parameters. Refer to 
the 

log [option]
Specifies the type of entries to be entered in the event log. Refer to the 

.

pagebreak [state]
Specifies how much information is displayed on the screen at a time according to 
the value given by [state]. This keyword is available with User authority. [state] can 
be one of the following:

on
Limits the display of information to 20 lines at a time. The page break 
functions affects the following commands: Alias (List, Members), Show 
(Alarm, Log), Zone (List, Members), Zoneset (List, Zones), Zoning (Active, 
List).

off
Allows continuous display of information without a break.