Q-Logic 59021-05 Manuel D’Utilisation
B – Command Line Interface
Set Command
B-24
59021-05 A
port [option]
Sets port state and speed for the specified port temporarily until the next switch
reset or new configuration activation. Refer to the
Sets port state and speed for the specified port temporarily until the next switch
reset or new configuration activation. Refer to the
setup [option]
Changes SNMP and system configuration settings. Refer to the
Changes SNMP and system configuration settings. Refer to the
.
switch [state]
Temporarily changes the administrative state for all ports on the switch to the state
given by [state]. The previous Set Config Switch settings are restored after a
switch reset or a reactivation of a switch configuration. [state] can be one of the
following:
Temporarily changes the administrative state for all ports on the switch to the state
given by [state]. The previous Set Config Switch settings are restored after a
switch reset or a reactivation of a switch configuration. [state] can be one of the
following:
online
Places all ports online
Places all ports online
offline
Places all ports offline.
Places all ports offline.
diagnostics
Prepares all ports for testing.
Prepares all ports for testing.
Examples
The following examples enables and disables the beacon:
SANbox2 $> set beacon on
Command succeeded.
SANbox2 $> set beacon off
Command succeeded.