Q-Logic 5600 Manuel D’Utilisation

4 – Managing Switches

Displaying Switch Information

59097-02 B

4-9

A

MAC Address

Media Access Control address

IP Address

Internet Protocol address

Subnet Mask

Mask that determines the IP address subnet

Gateway

Gateway address

SNMP Enabled

SNMP enabled or disabled. 

Negotiated Domain ID

The domain ID currently being used by the fabric

Configured Domain ID

The domain ID defined by network administrator

Domain ID Lock

Domain ID lock status. Prevents (True) or permits (False) 
dynamic domain ID reassignment.

Number of Ports

Number of ports activated on the switch.

Switch Type

Switch model

Operational State

Switch operational state: Online, Offline, Diagnostic, 
Down

Administrative State

Current switch administrative state

Configured Admin State

Switch administrative state that is stored in the switch 
configuration

R_A_TOV

Resource allocation timeout value

E_D_TOV

Error detect timeout value

Interop Mode 

Zoning merge status. When a zone set is activated on an 
FC-SW-2 compliant switch, only the active zone set is 
propagated to all switches in the fabric. When a zone set 
is activated on a non-FC-SW-2 compliant switch, the 
active zone set and all inactive zone sets (the entire zon-
ing database) are stored in permanent memory. The 
Interop Mode setting must be the same on all switches in 
the fabric, otherwise the inter-switch links will not connect.

Legacy Address Format

Legacy port addressing status. Enabled only for interoper-
ability with non-FC-SW-2 compliant switches.

Interop Auto Save

Zoning auto save status. Saves zoning updates in tempo-
rary memory and the zoning database (True) or only in 
temporary memory (False).