Q-Logic 5600 Manuel D’Utilisation

4 – Managing Switches

Displaying Switch Information

4-10

59097-02 B

S

Zoning Default Visibility

Zoning visibility status. Permits (All) or prevents (None) 
communication between attached devices in the absence 
of an active zone set.

Temperature

Internal switch temperature °C

Security Auto Save

N/A - does not apply to this switch

Security Fabric Binding 
Enable

N/A - does not apply to this switch

Fan 1 Status

The status of Fan 1 (SANbox 5602 only)

Fan 2 Status

The status of Fan 2 (SANbox 5602 only)

Power Supply 1 Status

Power supply 1 status

Power Supply 2 Status

Power supply 2 status (SANbox 5602 only) 

Beacon Status

Beacon status. Switch LEDs are blinking (On) or not (off).

Broadcast Support

Broadcast support status. Broadcast support is enabled or 
disabled (default).

In-band Enabled

In-band management status. Permits (True) or prevents 
(False) a switch from being managed over an ISL.

Temperature Failure Port 
Shutdown 

Non-configurable (always enabled for this switch). All 
ports are downed when the switch temperature exceeds 
the Failure Temperature.

Warning Temperature

Non-configurable temperature threshold (65° Celsius) 
above which a warning condition alarm is generated.

Failure Temperature

Non-configurable temperature threshold (70° Celsius) 
above which a failure condition alarm is generated.

NTP Client Enabled

Enabled or disabled. Allows for switches to synchronize 
their time a centralized server. 

NTP Server Address

The IP address of the centralized NTP server. Ethernet 
connection to NTP server is required. 

FDMI HBA Entry Limit

Maximum number of HBAs that can be registered with a 
switch.