Q-Logic 8C/16 Manuel D’Utilisation

A – Command Line Interface
Image Command

A-16

59022-06 A

Q

Manages and installs switch firmware.

Admin

cleanup
fetch [account_name] [ip_address] [file_source] [file_destination]
list
unpack [file]

cleanup
Removes all firmware image files from the switch. All firmware image files are 
removed automatically each time the switch is reset.
fetch [account_name] [ip_address] [file_source] [file_destination]
Retrieves image file given by [file_source] and stores it on the switch with the file 
name given by [file_destination]. The image file is retrieved from the device with 
the IP address given by [ip_address] and an account name given by 
[account_name]. If an account name needs a password to access the device, the 
system will prompt you for it.
list
Displays the list of image files that reside on the switch.
unpack [file]
Installs the firmware file given by [file]. After unpacking the file, a message 
appears confirming successful unpacking. The switch must be reset for the new 
firmware to take effect.

To provide consistent performance throughout the fabric, ensure that all switches 
are running the same version of firmware.

Use the Hotreset command to perform a non-disruptive activation for firmware 
versions that follow version 2.0.