Q-Logic 8C/16 Manuel D’Utilisation

A – Command Line Interface

Set Port Command

59022-06 A

A-41

Q

Sets port state and speed for the specified port temporarily until the next switch 
reset or new configuration activation. This command also clears port counters.

Admin

bypass [alpa]
clear 
enable
speed [transmission_speed]
state [state]

[port_number]
Specifies the port. Ports are numbered beginning with 0.
bypass [alpa]
Sends a Loop Port Bypass (LPB) to a specific Arbitrated Loop Physical Address 
(ALPA) or to all ALPAs on the arbitrated loop. [alpa] can be a specific ALPA or the 
keyword ALL to choose all ALPAs.
clear
Clears the counters on the specified port.
enable
Sends a Loop Port Enable (LPE) to all ALPAs on the arbitrated loop.
speed [transmission_speed]
Specifies the transmission speed for the specified port. Choose one of the 
following port speed values:

1Gb/s
One gigabit per second.
2Gb/s
Two gigabits per second.
Auto
The port speed is automatically detected.

state [state]
Specifies one of the following administrative states for the specified port:

Online
Places the port online.
Offline
Places the port offline.
Diagnostics
Prepares the port for testing.
Down
Disables the port.