Netgear M4100-50G Manuel D’Utilisation
Utility Commands
609
ProSafe M4100 and M7100 Managed Switches
Software License Commands
License commands allow you to configure advanced features on some layer2 managed
switches. The following table lists the software license matrix for the layer2 managed
switches. For details, see
switches. The following table lists the software license matrix for the layer2 managed
switches. For details, see
Managed Switches
Note:
The software license allows the user to download a license file only
on the Master unit. The file cannot be downloaded on a Slave unit.
There are two options to download the license file to the switch:
•
Use the Copy command to download the license file through the CLI.
•
Go to the Maintenance > Download page to download the licence file through the GUI.
show license
This command displays the license status.
License Date indicates the date of the license. License Status indicates whether license is
active or inactive.
active or inactive.
Format
show license
Mode
Example: The following shows example CLI display output for the command.
(Managed Switches) #show license
License date : Apr-9-2010
License copy : 1
License Status: Active
Description : License key is active.
Field
Description
Sampler Data
Source
Source
The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical
ports only.
ports only.
Receiver Index
The sFlowReceiver configured for this sFlow sampler.
Packet
Sampling Rate
Sampling Rate
The statistical sampling rate for packet sampling from this source.
Max Header
Size
Size
The maximum number of bytes that should be copied from a sampled packet to form a
flow sample.
flow sample.
Switch
IPv4 Routing
IPv6 Routing
IP Multicast
Licensed
Licensed
Licensed
Privileged EXEC