Netgear M4100-50G Manuel D’Utilisation

(Managed Switches) #

This command displays the features that are licensed on the switch

show license features

Example: The following shows example CLI display output for the command.

(Managed Switches) #show license features

IGMP 

MCAST 

PIMDM 

DVMRP 

PIMSM 

OSPFV3 

IPV6

IP Address Conflict Commands

This command triggers the switch to run active address conflict detection by sending 
gratuitous ARP packets for IPv4 addresses on the switch.

This command takes effect only once after it is executed and cannot 

be saved across power cycles. 

ip address-conflict-detect run

This command displays the status information corresponding to the last detected address 
conflict.

Privileged EXEC

Global Config

Identifies whether the switch has detected an address conflict on any IP address.

The IP Address that was last detected as conflicting on any interface.