3com WX3000 Manuel D’Utilisation

 

1-8 

Log host 
direction 

info-center timestamp 
loghost date 

Set the time 
stamp format 
in the output 
direction of 
the 
information 
center to 
date 

Non log host 
direction 

info-center timestamp { log | 
trap | debugging } date 

Required 

Use either command 

Set to display the UTC time zone 
in the output information of the 
information center 

info-center timestamp utc 

Required 

By default, no UTC time zone 
is displayed in the output 
information 

 

Follow these steps to set to output system information to the console: 

Enter system view 

— 

Enable the information center 

info-center enable 

Optional 

Enabled by default. 

Enable system information 
output to the console 

info-center console channel 
{ channel-number | 
channel-name } 

Optional 

By default, the device uses 
information channel 0 to output 
log/debugging/trap information 
to the console. 

Configure the output rules of 
system information 

info-center source 
{ modu-name | default } 
channel { channel-number | 
channel-name } [ { log | trap | 
debug } { level severity | state 
state } ]* 

Optional 

Refer to 

default output rules of system 
information. 

Set the format of time stamp in 
the output information 

info-center timestamp { log | 
trap | debugging } { boot | 
date | none } 

Optional 

By default, the time stamp 
format of the log and trap 
output information is date, and 
that of the debugging output 
information is boot. 

 

To view the debugging information of some modules on the device, you need to set the type of the 

output information to debug when configuring the system information output rules, and use the 

debugging command to enable debugging for the corresponding modules.