3com WX3000 Manuel D’Utilisation

 

1-10 

System information can also be output to a monitor terminal, which is a user terminal that has login 

connections through the AUX, VTY, or TTY user interface. 

Follow these steps to set to output system information to a monitor terminal: 

Enter system view 

— 

Enable the information center 

info-center enable 

Optional 

Enabled by default. 

Enable system information 
output to Telnet terminal or 
dumb terminal 

info-center monitor channel 
{ channel-number | 
channel-name } 

Optional 

By default, the device outputs 
log/debugging/trap information 
to a user terminal through 
information channel 1. 

Configure the output rules of 
system information 

info-center source 
{ modu-name | default } 
channel { channel-number | 
channel-name } [ { log | trap | 
debug } { level severity | state 
state } ]* 

Optional 

Refer to 

default output rules of system 
information. 

Set the format of time stamp in 
the output information 

info-center timestamp { log | 
trap | debugging } { boot | 
date | none } 

Optional 

By default, the time stamp 
format of the log and trap 
output information is date, and 
that of the debugging output 
information is boot. 

 

z 

When there are multiple Telnet users or dumb terminal users, they share some configuration 

parameters including module filter, language and severity level threshold. In this case, change to 

any such parameter made by one user will also be reflected on all other user terminals. 

z 

To view debugging information of specific modules, you need to set the information type as debug 

when setting the system information output rules, and enable debugging for corresponding 

modules through the debugging command. 

 

After setting to output system information to a monitor terminal, you need to enable the associated 

display function in order to display the output information on the monitor terminal.