3com WX3000 Manuel D’Utilisation

 

1-13 

Enable information output to 
the log buffer 

info-center logbuffer 
[ channel { channel-number | 
channel-name } | size 
buffersize ]* 

Optional 

By default, the device uses 
information channel 4 to output 
log information to the log buffer, 
which can holds up to 512 
items by default. 

Configure the output rules of 
system information 

info-center source 
{ modu-name | default } 
channel { channel-number | 
channel-name } [ { log | trap | 
debug } { level severity | state 
state } ]* 

Optional 

Refer to 

default output rules of system 
information. 

Set the format of time stamp in 
the output information 

info-center timestamp { log | 
trap | debugging } { boot | 
date | none } 

Optional 

By default, the time stamp 
format of the output log 
information is date. 

 

Follow these steps to set to output system information to the SNMP NMS: 

Enter system view 

— 

Enable the information center 

info-center enable 

Optional 

Enabled by default. 

Enable information output to 
the SNMP NMS 

info-center snmp channel 
{ channel-number | 
channel-name } 

Optional 

By default, the device outputs 
trap information to SNMP 
through channel 5. 

Configure the output rules of 
system information 

info-center source 
{ modu-name | default } 
channel { channel-number | 
channel-name } [ { log | trap | 
debug } { level severity | state 
state } ]* 

Optional 

Refer to 

default output rules of system 
information. 

Set the format of time stamp in 
the output information 

info-center timestamp { log | 
trap | debugging } { boot | 
date | none } 

Optional 

By default, the time stamp 
format of the information output 
to the SNMP NMS is date. 

 

To send information to a remote SNMP NMS properly, related configurations are required on both the 

device and the SNMP NMS.