3com WX3000 Manuel D’Utilisation

 

1-12 

Set the format of the time 
stamp to be sent to the log host 

info-center timestamp 
loghost { date | no-year-date | 
none } 

Optional 

By default, the time stamp 
format of the information output 
to the log host is date. 

 

Be sure to set the correct IP address when using the info-center loghost command. A loopback IP 

address will cause an error message prompting that this address is invalid. 

 

Follow these steps to set to output system information to the trap buffer: 

Enter system view 

— 

Enable the information center 

info-center enable 

Optional 

Enabled by default. 

Enable system information 
output to the trap buffer 

info-center trapbuffer 
[ channel { channel-number | 
channel-name } | size 
buffersize ]* 

Optional 

By default, the device uses 
information channel 3 to output 
trap information to the trap 
buffer, which can holds up to 
256 items by default. 

Configure the output rules of 
system information 

info-center source 
{ modu-name | default } 
channel { channel-number | 
channel-name } [ { log | trap | 
debug } { level severity | state 
state } ]* 

Optional 

Refer to 

default output rules of system 
information. 

Set the format of time stamp in 
the output information 

info-center timestamp { log | 
trap | debugging } { boot | 
date | none } 

Optional 

By default, the time stamp 
format of the output trap 
information is date. 

 

Follow these steps to set to output system information to the log buffer: 

Enter system view 

— 

Enable the information center 

info-center enable 

Optional 

Enabled by default.