Samsung RSH1B Manuel D’Utilisation

setting up

 

setting up your side-by-side 

refrigerator

Connecting the water line to the refrigerator

1.    Remove the cap from water line on the unit and insert compression nut to the water line on 

the unit after disassembling from provided water line.

2. Connect both water line from the unit and water line provided kit.
3.  Tighten the compression nut onto the compression fitting. Be careful no gap between two items.
4. Turn water on and check for any leakage.

Only connect the water line to a drinkable water source. 
If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to 
make sure you get a snug, leak-free connection.

Before being used, the leakage in these places should be examined

• Samsung Warranty does 

not cover  WATER LINE 
INSTALLATION.

• It’ll be done at customer’s 

charge except the retail price 
includes installation cost.

• Please contact Plumber or 

Authorized Installer for the installation if needed.

• If Water leakage happened due to improper installation, Please contact installer.

Installing the water filter.

1.  Remove the water filter from the box and put 

a replacement indicator sticker on the filter as 
shown.

.  Place a sticker on the filter that dates six months 

in the future. For example, if you install the water 
filter in March, put the “SEP” sticker on the filter 
to remind you to replace in September. That 
way you’ll know when it is time to replace the 
filter. Normally filter life is about 6 months.

.  Next, remove the fixed cap by turning it counter 

clockwise. Keep the cap in a safe place for use 
if you choose not to use a filter.

sticker

(Month indication)

01 
setting

 u

P

DA99-01507A(HM-134a)-EN(0.0).ind19   19

2007.4.21   9:59:57 AM