Samsung RSH1B Manuel D’Utilisation

setting up

 

setting up your side-by-side 

refrigerator

Remove any residual matter inside the purifier. (Model with the purifier)

-  Open the main water tap to check whether 

water is running through the water tube on the 
water inlet side of the purifier.

-  If water does not come out through the line, 

check whether the tap is open.

-  Leave the tap open until clean water is running 

out and any residual matter that built up during 
manufacturing has been removed.

Attach the purifier lock stations.

-  Hold the purifier lock stations in the appropriate 

position (under the sink for example) and fix it tightly 
into place where to screw.

Secure the purifier in position.

-  Fix the purifier in position, as shown in the 

figure on the right.

Connect the water line to the refrigerator.

- Remove the compressor cover of the refrigerator.
-  Connect the water line to the valve, as shown in the 

figure.

-  When connected, check if there is any leakage.            

If any, repeat the connection.

- Reattach the compressor cover of the refrigerator.

Secure the water line.

-  Using clip ”A”, fix the water line to the wall (the back of 

refrigerator).

-  When the water line is secure, make sure whether the water line 

is not excessively bent, pinched or squashed.

01 
setting

 u

P

WATER LINE

PURIFIER

WATER

OUTLET SIDE

OF PURIFIER

CLIP A

WATER LINE

TIGHTENING

BAND

PURIFIER

WATER TUBE

PURIFIER

LOCK 

STATIONS

TWO PURIFIER LOCK

STATION

TWO PURIFIER LOCK

STATION

WATER LINE

INSTRUCTIONS

COMPRESSOR COVER OF

REFRIGERATOR

CONNECTION NUT

DA99-01507A(HM-134a)-EN(0.0).ind21   21

2007.4.21   10:0:1 AM