Samsung RSH1B Manuel D’Utilisation

.  Remove the filter’s protective cap 

and then position and insert the 
filter into the filter housing.

.  Slowly turn the water filter 

clockwise 90º to align with the 
indication mark on the cover, 
locking the filter in position. Make 
sure that the indicator is lined up 
with the “lock” position. Remember, 
do not over-tighten.

If your model contains wine shelf, you should remove the wine shelf before installing water 
filters.

instaLLing tHe water DisPenser Line

For Exterior model

Parts for water line Installation

Connecting to the water supply line

 

setting up

Cover filter

align the indication

mark with lock position

separation

of red cap

The water line must be connected

to the cold water pipe.

If it is connected to the hot

water pipe, it may cause the

purifier to malfunction.

WARRANTY INFORMATION
This water line installation is not covered by the 

refrigerator or ice maker manufacturer’s warranty.

Follow these instructions carefully to minimise the 

risk of expensive water damage.

If the coupler does not fit on the current tap, go

the nearest authorised service dealer and 

purchase the right couplers fittings.

COUPLER “A”

TAP

select the location where the purifier is to 
install. (Model with the purifier)

-  If you wish to reassemble the water inlet and out-

let sides of the purifier during purifier installation, 
see the reference illustration.

-  Cut the water line attached to the purifier to the 

appropriate place after measuring the distance 
between the purifier and the cold water tap.

COUPLER

SIDE OF

PURIFIER

WATER INLET

SIDE OF PURIFIER

LINE OUTLET

PURIFIER WATER

REFERENCE

DA99-01507A(HM-134a)-EN(0.0).ind20   20

2007.4.21   9:59:59 AM