Samsung RM255BABB Manuel D’Utilisation

For the disassembly of evaporator cover, water
tank and partition should be disassembled
first.
1. Remove the cap screws(4 pieces), and remove

other screws(4 pieces).

3. Insert the flat-tip screwdriver into the center of

insulation-partition, and lift it up slightly to open
the door in the lower compartment. then lift the
insulation-partition upward to separate.

2. Pull the upper part of the evaporator cover slightly.

3. Separate the housing terminal connected to the

right side of evaporator cover, and lift it up carefully
using both hands.

The evaporator fan is located in the middle rear
of the freezer. This fan circulates cold air in the
freezer.
1. Remove screws (4 pieces) from the four

corners of the fan bracket.

2. Disassemble the fan motor.

55

55