Samsung RM255BABB Manuel D’Utilisation

1.First separate the two lamp- covers which are in the

upper part.

2. Unscrew the lower part and the center of the duct-work.

3. Unscrew (2 screws) the upper part of the evaporator

cover to take out the duct work by pulling.

4. Separate the sensor-cover in the lower part of duct

work. And then separate the housing terminals(lamp &
thermistor) and pull them out using both hands.

The Evaporator Fan Motor in the Fresh Select Zone is
located in the lower part of the cooling compartment.
1.Unscrew the fan-cover. (2 screws)

2. Separate the insulation covering the fan by

removing the sponge and tape.

3. Separate the housing terminal connected to the

fan, and lift up the FAN.

screws

57

57