Audiovox ce525 Mode D'Emploi
PARTS IDENTIFICATION
1.
VOLUME button
2.
SLEEP button
3.
TIMER button
4.
FUNCTION button
5.
RANDOM/TUNING/REPEAT button
6.
EQ button
7.
X-BASS button
8.
REMOTE SENSOR
9.
POWER ON/OFF button
10. HEADPHONE jack
11. DISPLAY window
12. PLAY/PAUSE button
13. BAND/STOP button
12. PLAY/PAUSE button
13. BAND/STOP button
14. SKIP/SEARCH/PRESET button
15. MEMORY/CLOCK button
15. MEMORY/CLOCK button
16. EJECT button
17. CD slot
REMOTE CONTROL
1.
SLEEP button
2.
RANDOM/TUNING/REPEAT button
3.
EJECT button
4.
X-BASS button
5.
SKIP/SEARCH/PRESET button
6.
BAND/STOP button
7.
TIMER button
8.
EQ button
9.
MEMORY/CLOCK button
10. VOLUME button
11. PLAY/PAUSE button
11. PLAY/PAUSE button
12. FUNCTION button
13. POWER/STANDBY button
SYSTEM CONNECTIONS
TUNER SECTION
TUNING INTO A STATION MANUALLY
1. Press the FUNCTION button to TUNER.
2. Press BAND button and tune a station.
3. Press the TUNING button to select a station
3. Press the TUNING button to select a station
FOR BETTER RECEPTION
FM
FM
Connect the external FM
antenna wire to the FM
antenna terminal. Fully
unwind the wire antenna.
Then extend the wire
antenna and place it in the
position that sounds best.
antenna wire to the FM
antenna terminal. Fully
unwind the wire antenna.
Then extend the wire
antenna and place it in the
position that sounds best.
NOTE: DO NOT CONNECT TO AN OUTSIDE
ANTENNA
ANTENNA
AM
Adjust the AM loop
antenna for the
best sound.
antenna for the
best sound.
TO SEARCH FOR A STATION AUTOMATICALLY
Press the TUNING button UP or DOWN for 1 to 2
seconds, and a station is searched for
automatically. After tuning in to a station, the
search stops.
seconds, and a station is searched for
automatically. After tuning in to a station, the
search stops.
The search may not stop at a station with a very
weak signal.
weak signal.
IF THE FM STEREO BROADCAST SIGNAL IS
WEAK
WEAK
Set FM STEREO button until “ST”indicator appears
in the display for a while. Background noise will
be reduced but the signal reproduced will be
mono.
in the display for a while. Background noise will
be reduced but the signal reproduced will be
mono.
PRESETTING STATION
The unit can store a total of
40 stations. They can be
tuned in to by selecting
their preset numbers. It is
possible to store stations of
any band in order of your
choice.
The unit can store a total of
40 stations. They can be
tuned in to by selecting
their preset numbers. It is
possible to store stations of
any band in order of your
choice.
1. Press Function button once to
set the unit to CD mode. The
display will show:
display will show:
2. Press Function button once
again to set the unit to
Tuner mode, the display will
show:
Tuner mode, the display will
show:
TURNING ON THE UNIT
3. Press Function button once
again to set the unit to Aux
mode, the display will show:
mode, the display will show:
TO TURN ON THE UNIT
Press the power on button, the display will light up. Select the desired function and the
corresponding function indicator will light up.
corresponding function indicator will light up.
Press the power button until the display show the time.
CLOCK SETTING (at standby mode)
1. Press memory/clock
button in clock mode.
Hour blink.
Hour blink.
2. Press skip buttons to
set correct hour
3. Press memory
button to make
minutes blink.
minutes blink.
4. Press skip buttons
to set correct
minutes and press
memory button to
start the clock.
minutes and press
memory button to
start the clock.
Note: If a button is
not pressed for 10
seconds, the clock
set mode will be
exited automatically.
not pressed for 10
seconds, the clock
set mode will be
exited automatically.
TIMER OPERATION
The power can be turned on and off automatically
at a preset time so that you can wake up to CD or
radio. Make sure the clock is correct before timer
setting.
The power can be turned on and off automatically
at a preset time so that you can wake up to CD or
radio. Make sure the clock is correct before timer
setting.
TIMER SETTING
1. Press clock button until
timer ‘00’ is in the
display.
display.
2. Press memory button in
clock mode. Hour blink.
3. Press skip button to set
correct hour.
4. Press memory button to
make minutes blink.
5. Press skip button to set correct minutes
6. Press memory button to set the duration of timer
6. Press memory button to set the duration of timer
to be on. It can be set from 5 minutes to 240
minutes.
minutes.
Cancel the timer function
Press the timer button until the timer indicator
turns off. It can only be operated when the unit is
turned on.
turns off. It can only be operated when the unit is
turned on.
IMPORTANT
Switch off the power before connecting speakers
and other equipment.
Switch off the power before connecting speakers
and other equipment.
1. AM LOOP ANTENNA TERMINALS
Do not connect to
an outside
antenna. Connect
the supplied AM
loop antenna to
receive the AM
broadcast signal.
an outside
antenna. Connect
the supplied AM
loop antenna to
receive the AM
broadcast signal.
2. CONNECTION WITH OTHER OPTIONAL
EQUIPMENT
To listen to audio signals
from external units
through this unit.
Connect the red plug to
the Aux R jack, and the
white plug to the Aux L
jack.
from external units
through this unit.
Connect the red plug to
the Aux R jack, and the
white plug to the Aux L
jack.
LISTENING TO THE CONNECTED EQUIPMENT
a. Press the FUNCTION button to AUX.
b. Play the external source.
3. POWER OUTPUT METER SOCKET
Insert the black cable with the plug of the
Subwoofer to this socket. This connects the unit
to the Power meter indicator in the subwoofer.
Subwoofer to this socket. This connects the unit
to the Power meter indicator in the subwoofer.
4. SUB-WOOFER OUTPUT TERMINAL
Connect the speaker cable for the Subwoofer to
this terminal. Arrange the speakers to ensure a
stereo effect. The main sound direction should
not be interfered with by furniture, curtains etc.
this terminal. Arrange the speakers to ensure a
stereo effect. The main sound direction should
not be interfered with by furniture, curtains etc.
5. FM ANTENNA WIRE TERMINAL
Do not connect to an outside antenna. Connect
the supplied FM antenna to this terminal to
receive an acceptable FM signal.
Do not connect to an outside antenna. Connect
the supplied FM antenna to this terminal to
receive an acceptable FM signal.
TUNING INTO A PRESET STATION
Press the Skip/Preset button
6. To preset more than one
station,
repeat steps 2 to 5.
5. Press the memory/clock set
button.
4. Press SKIP/SEARCH buttons
to preset number
3. Press the MEMORY/CLOCK
set button.
2. Press the BAND button to
select the desired band and
tune a station.
tune a station.
1. Press the FUNCTION button
to TUNER
MANUAL MEMORY PRESETTING
This feature allows you to set stations into memory.
This feature allows you to set stations into memory.
PRECAUTIONS
Follow the advice below for safe and appropriate
operation.
operation.
ON PLACEMENT
• Do not use the unit in places which are
• Do not use the unit in places which are
extremely hot, cold, dusty, or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing
• Do not restrict the air flow of the unit by placing
it in a place with poor air flow, by covering it
with a cloth, or by placing it on carpet.
with a cloth, or by placing it on carpet.
ON SAFETY
• When connecting and disconnecting the AC
• When connecting and disconnecting the AC
cord, grip the plug and not the cord itself.
Pulling the cord may damage it and create a
hazard.
Pulling the cord may damage it and create a
hazard.
• When you are not going to use the unit for a
long period of time, unplug it.
ON AC VOLTAGE
• Before use, check that the rated voltage of your
• Before use, check that the rated voltage of your
unit matches your local voltage.
ON CONDENSATION
• When left in a heated room where it is warm
• When left in a heated room where it is warm
and damp, water droplets or condensation may
from inside the CD player.
from inside the CD player.
• When there is condensation inside the unit, the
unit may not function normally.
• Let it stand for 1 to 2 hours before turning the
power on, or gradually heat the room up and
dry the unit before use.
dry the unit before use.
FCC INFORMATION
This device complies with Part 15 of FCC rules.
Operations are subject to the following two
conditions:
Operations are subject to the following two
conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operations.
undesired operations.
Should any trouble occur, disconnect the AC power
cord and refer servicing to a qualified technician.
cord and refer servicing to a qualified technician.
6. SPEAKER CORD CONNECTION
Connect the right speaker to the R terminal, and
the left to the L terminal.
the left to the L terminal.
Connect the wires
with the printed
white lines to the
red (+) terminals
and the plain-black
wires to the black
(-) terminals.
with the printed
white lines to the
red (+) terminals
and the plain-black
wires to the black
(-) terminals.
WARNING:
Connecting speakers other than the speakers
supplied with the unit may damage the unit.
supplied with the unit may damage the unit.
7. POWER CORD CONNECTION
Before use, check that the rated voltage of your
unit matches your local voltage.
unit matches your local voltage.
Connect the AC cord to an AC outlet. The clock
will be displayed.
Caution: To prevent electrical shock, match wide
blade of plug to wide slot, fully insert.
will be displayed.
Caution: To prevent electrical shock, match wide
blade of plug to wide slot, fully insert.
TUNER SECTION (... continue)
NOTE
If a button is not pressed for 10
seconds the preset mode will be
exited automatically.
If a button is not pressed for 10
seconds the preset mode will be
exited automatically.
In some extreme cases, due to shock, excessive
static electricity or changes on supply voltage,
the unit may not operate, and you will not be
able to activate the control on the unit.
static electricity or changes on supply voltage,
the unit may not operate, and you will not be
able to activate the control on the unit.
In this case, please turn off the power, then
disconnect the AC power cord. To resume
operation, connect the AC power cord into the
power outlet again.
disconnect the AC power cord. To resume
operation, connect the AC power cord into the
power outlet again.
1. Open the battery door.
2. Insert two AAA
batteries.
TO INSTALL BATTERIES
USING THE REMOTE CONTROL CORRECTLY
• Point the Remote Control at the REMOTE
SENSOR located on the unit.
• When there is a strong ambient light source,
the performance of the infrared REMOTE
SENSOR may be degraded, causing unreliable
operation.
SENSOR may be degraded, causing unreliable
operation.
• The recommended effective distance for
remote operation is about 19 feet (6 m).
BATTERY REPLACEMENT
When batteries become weak, the operating
distance of the Remote Control is greatly reduced
and you will need to replace the batteries.
distance of the Remote Control is greatly reduced
and you will need to replace the batteries.
NOTE: If the Remote Control is not going to be
used for a long time, remove the batteries to avoid
damage caused by battery leakage corrosion.
used for a long time, remove the batteries to avoid
damage caused by battery leakage corrosion.
REMOTE CONTROL
AUX
11
12
13
14
15
16
17
1
2
3
3
4
5
6
7
8
9
10