Toshiba 50hp82 Manuel Du Propriétaire

38

The 2nd line of the “WORKING TIME”:

→

 

 ↔ 

 ↔ 

 ↔ 

 ↔ 

 ↔ 

 

←

The 1st line of the “WAITING TIME”:

→

 

 ↔

 ↔ 

 ↔ 

 ↔ 

 ↔ 

 

←

The 2nd line of the “WAITING TIME”:

→

 

 ↔ 

 ↔ 

 ↔ 

 ↔ 

 ↔ 

 

←

6.  Once the setting is completed...

Press the EXIT button several times to return to the
main menu.
To close the main menu, press the EXIT button once
more.

WORKING TIME

Set the length of time the “INVERSE/WT” mode lasts.
When the WORKING TIME is set to “ON,” the
“INVERSE/WT” mode stays in the on state.

WAITING TIME

Set the length of time until the “INVERSE/WT” mode
starts.
• The “WORKING TIME” and “WAITING TIME” can

be set for up to 12 hours and 45 minutes in units of 3
minutes.

Set the hours of the WORKING TIME to 0H and the
minutes to 0M.  “ON” will be displayed.

Set the “SCREEN WIPER” operation time, “WAITING
TIME,” and “SPEED.”

Example:  Setting so that the SCREEN WIPER mode
starts in 30 minutes and proceeds for one and a half
hours.

3. Use the ▲ and ▼ buttons to select “SCREEN WIPER,”

then use the 

 and 

 buttons to select “ON.”

4. Press the PROCEED button.

The “SCREEN WIPER” screen appears.

5. Adjust the time and speed using the 

 and 

  buttons

and the ▲ and ▼  buttons.
The mode switches as follows each time the 

 and 

button is pressed.

The 1st line of the “WORKING TIME”:

→

 

 ↔ 

 ↔ 

 ↔ 

 ↔ 

 ↔ 

 

←

•  The “WORKING TIME” (minutes) and “WAITING

TIME” cannot be set when the “WORKING TIME”
is “ON.”