Mitsubishi ws-48513 Manuel Du Propriétaire
22
23
Connecting an External Digital TV (DTV or HDTV) Receiver
DTV Connectors and Adaptors
Figure 11
The TV back panel has 5 RCA-type connectors for the
Input-DTV. The back panel of your external DTV receiver
may use RCA-type connectors or BNC-type connectors.
If your DTV receiver comes with BNC type connections,
you will need to purchase BNC to RCA adaptors to
connect the TV to the DTV receiver. These adaptors
should be available at most electronic supply stores.
may use RCA-type connectors or BNC-type connectors.
If your DTV receiver comes with BNC type connections,
you will need to purchase BNC to RCA adaptors to
connect the TV to the DTV receiver. These adaptors
should be available at most electronic supply stores.
External DTV Receiver with
Component Video Connections
Component Video Connections
Figure 12
1. Connect the outside antenna, cable or satellite to ANT
or SATELLITE IN on the DTV receiver (see your DTV
receiver’s owner’s guide for instructions and cable
compatibility).
2. Connect the incoming terrestrial antenna or cable (not
satellite) to ANT-A on the TV back panel (a coaxial
splitter, available at most electronic supply stores, may
be required to complete this installation).
splitter, available at most electronic supply stores, may
be required to complete this installation).
3. Connect RCA-type cables from the YPrPb outputs on
the DTV receiver to Input-DTV on the TV back panel,
matching the correct connections:
matching the correct connections:
DTV Receiver to TV Back panel
•
Y to Y
•
Pr to Pr
•
Pb to Pb
Note: You may need to set the Input-DTV
assignment to YPrPb instead of RGB. Refer to
the Edit NetCommand® Setup for instructions on
changing this setting.
assignment to YPrPb instead of RGB. Refer to
the Edit NetCommand® Setup for instructions on
changing this setting.
4. Connect the L (left) and R (right) audio cables from
the DTV receiver to Input-DTV AUDIO on the TV back
panel.
panel.
Note: To utilize the benefits of a digital A/V receiver,
connect your DTV receiver’s digital audio out to a
digital input on your digital A/V receiver.
connect your DTV receiver’s digital audio out to a
digital input on your digital A/V receiver.
BNC to
RCA
RCA
BNC
Adaptor Connector
Adaptor
Fitted to
Connection
Fitted to
Connection
RCA
Connector
or
See Appendix B for component video
signal compatibility information.
signal compatibility information.
For digital audio connections, see your
DTV Receiver and A/V Receiver Owner’s
DTV Receiver and A/V Receiver Owner’s
Guides.
IMPORTANT
DTV Receiver (with YPrPb connections)
VIDEO
Y
Pr
Pb
S-VIDEO
VCR
CONTROL
PHONE JACK
RF
REMOTE
OUT TO TV
CH 3
CH 4
CH 4
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
DIGITAL
AUDIO OUT
White
Red
Incoming
Antenna
or Cable
1
1
SATELLITE IN
IN FROM ANT
or
to antenna,
cable or satellite
AUDIO
L
R
4
2
2
3
3
3
3
4
W
h
i
t
e
R
e
d
AUDIO
L
R
VIDEO
Figure 11. DTV Connectors and Adaptors
Figure 12. Connecting an External DTV Receiver with
Component Video Connections