Mitsubishi ws-48513 Manuel Du Propriétaire

74

75

NetCommand

®

 Controlled Peer-to-Peer Connections

What is a Peer-to-Peer Connection?

A peer-to-peer connection allows the IEEE 1394 devices 

in your TV network to talk to each other without the 
further need of TV intervention once the peer-to-peer 
connection is established.

For example, the TV can setup a connection for an A/V 
Disc or DVCR that sends a recorded program to an 
IEEE 1394 monitor in another room.  NetCommand will 
establish the connection between the two devices.  Once 
the connection has been established, the TV can be 
turned off or used to watch another device.  Recording 
from Ant-DTV to a DVCR is also a peer-to-peer 
connection.  In this case the TV is one of the devices in 
the peer-to peer connection.

Analog or traditional (non-digital) devices can not be 

used for peer-to-peer connections.

Setting up a Peer-to-Peer Connection

A peer-to-peer connection is a current connection and 

cannot be setup as a delayed connection.

To establish a peer-to-peer connection:

1. Press REC on the TV remote.

2.  Press DEVICE on the remote control to see the source 

device choices that you can recording from.

3. Press ADJUST    or   to select the source device you 

will record from.

4. Press ENT(er) to confirm selection and return to the 

“Record to” section.    

5. In the “Record to” section, review the destination 

device (example: DVHS) and duration.  Change if 

necessary.

6.  Press REC a second time to initiate recording.

Canceling a Current Peer-to-Peer 
Connection

When a peer-to-peer connection has been established, 
you can cancel the connection by highlighting the source 
device in the Device Selection menu.  Confirm that the 
on-screen icon for the peer-to-peer connection is in 
the Connection Section next to the TV icon, then press  
CANCEL.  The peer-to-peer connection will end and the 
destination icon will be removed.  If there is more than one 

peer-to-peer connection for the same device, all of the 
connections will all be canceled.

NOTE:  Multiple peer-to-peer connections can 
occur simultaneously, sometimes with the same 
source device.  Also, please note that peer-to-peer 
connections are NOT listed on the Record List  
screen.