Mitsubishi ws-48513 Manuel Du Propriétaire
76
77
Recording on a NetCommand
®
Traditional VCR, A/V Disc
Search, Track List Screen
Recording on a NetCommand
Traditional VCR
Pressing REC (record) on the TV’s remote control will
function the same way as pressing the record button on
the VCR’s remote control or front panel.
function the same way as pressing the record button on
the VCR’s remote control or front panel.
To record directly from antenna or cable:
1. Press DEVICE on the TV’s remote to display the
Device Selection menu. Highlight the traditional VCR
and press POWER to turn on the VCR. If necessary,
press GUIDE to select the input the VCR is on, such as
and press POWER to turn on the VCR. If necessary,
press GUIDE to select the input the VCR is on, such as
Antenna input (or line input).
2. Press ENT(er) to switch the TV to the VCR.
3. Select the correct channel for recording on the
VCR and then press REC to start recording. You will
need to manually stop the recording at the end of the
program. OR...
program. OR...
4. Press the DEVICE MENU button to display the
VCR’s menu to schedule a delayed recording
directly from antenna or cable.
To record from Ant-A, Ant-B, Ant-DTV or other devices,
see NetCommand Controlled Recordings.
A/V Disc Search
NetCommand is able to search to a specific time in a
recording on an IEEE 1394 A/V Disc.
recording on an IEEE 1394 A/V Disc.
1. Start the playback of the desired track on the A/V
disc.
2. Use the number buttons to enter the time code
position of hours followed by minutes. For example, to
enter one hour and twenty-two minutes (1:22) into the
track, enter 1, 2, 2.
enter one hour and twenty-two minutes (1:22) into the
track, enter 1, 2, 2.
3. Press ENT(er) to skip to the time code position.
4. To cancel the request or to start over, press
CANCEL instead of ENT(er).
Track List Screen
Figure 2
When viewing an A/V Disc, press GUIDE to display the
Track List screen. The Track List screen provides a list of
tracks for the A/V Disc, including the time and date the
track was added, its duration and the title of the track.
track was added, its duration and the title of the track.
Tracks will be listed in time order with the most recent
recording listed first. Track Lists vary in size. Press
ADJUST or to navigate through the Track List. To
play a track, select it on the list, then press ENT(er). To
change pages, press CH or .
change pages, press CH or .
Once a track is selected, the first program begins to play.
If there are multiple programs in the track, the names
are displayed. Another program for the same track can
then be selected. A track must be selected and playing
for the multiple programs to be displayed. To delete a
track, select it, then press CANCEL. If the track includes
If there are multiple programs in the track, the names
are displayed. Another program for the same track can
then be selected. A track must be selected and playing
for the multiple programs to be displayed. To delete a
track, select it, then press CANCEL. If the track includes
multiple programs, all of them will be deleted.
Figure 2. Track List screen