Enterasys ssr-atm29-02 Mode D'Emploi
![Enterasys](https://files.manualsbrain.com/attachments/0d61cd0d9a60e36f1a6c1364af6a0a9788bcf75b/common/fit/150/50/0c43aa9c6913c8f0c68912f62e6506afc95280a8d9a1fc71e52e7f54646e/brand_logo.jpeg)
CoreWatch Users Guide
69
Chapter 6: Configuring SSR Bridging
A Default Aging Timeout dialog box similar to the following appears:
Figure 24. Default Aging Timeout Dialog Box
5.
Enter the number of seconds that the SSR is to allow a learned MAC address to
remain in the Layer-2 lookup table.
remain in the Layer-2 lookup table.
You can specify from 15 to 1,000,000 seconds. The default is 300 seconds.
6.
Click OK.
Overriding the Default Timeout Interval on a Port
As discussed in
, you can set an aging
timeout for learned MAC address entries that ports use by default. You may override this
default timeout if you want a port to use a different timeout interval. To override the
timeout interval on a port:
default timeout if you want a port to use a different timeout interval. To override the
timeout interval on a port:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file’s
Bridging Configuration object.
Bridging Configuration object.
3.
Double-click the Aging Configuration object.
4.
In the list of aging objects that appears, double-click the Aging Timeout Interval
object. Then select the Configure Aging Timeout on a New Port object that appears.
object. Then select the Configure Aging Timeout on a New Port object that appears.
A Set Aging Timeout dialog box similar to the following appears: