Enterasys ssr-atm29-02 Mode D'Emploi
![Enterasys](https://files.manualsbrain.com/attachments/0d61cd0d9a60e36f1a6c1364af6a0a9788bcf75b/common/fit/150/50/0c43aa9c6913c8f0c68912f62e6506afc95280a8d9a1fc71e52e7f54646e/brand_logo.jpeg)
Chapter 6: Configuring SSR Bridging
70
CoreWatch Users Guide
Figure 25. Set Aging Timeout Dialog Box
5.
From the Module drop-down list, select the module containing the port you want to
configure.
configure.
6.
From the Port drop-down list, select the port you want to configure.
7.
In the Timeout box, enter the number of seconds that the SSR is to allow a learned
MAC address to remain in the Layer-2 lookup table for the specified port.
MAC address to remain in the Layer-2 lookup table for the specified port.
You can specify from 15 to 1,000,000 seconds. The default is 300 seconds.
8.
Click OK.
Disabling Aging on a Port
Disable aging on a port if you do not want the SSR to age MAC address entries in the
port’s Layer-2 lookup tables.
port’s Layer-2 lookup tables.
Caution:
Disabling aging on a port may eventually cause the port’s Layer-2 lookup tables
to become full because the SSR will not remove MAC addresses from those tables.
To disable aging on a port:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file’s
Bridging Configuration object.
Bridging Configuration object.
3.
Double-click the Aging Configuration object.