Traynor tvm10 Mode D'Emploi

Page de 8
Phones Jack
Connect standard stereo headphones to this jack 
using a ¼-inch stereo plug. 
Note: the internal speaker is disconnected when the 
Phones jack is in use.
Power/Battery Status Light
When the power switch is on and the battery is 
fully charged, this LED illuminates yellow. The LED 
illuminates red when the battery needs recharging. 
Power Switch
Use this switch to turn the amplifier on and off. Switch 
it OFF when charging the battery.
Rear Panel
DC Charger Connector
Connect the 15 VDC charger to the amp here to 
recharge the battery (power switch off), then plug the 
charger into an AC outlet. When fully charged, the 
battery should provide approx.10 hours of amplifier use. 
NOTES: 
1. The internal battery should be replaced by 
authorized service technicians only!
2. For best performance, ensure that the TVM10 is 
switched off while the DC charger is connected. The 
TVM10’s battery charging system is not designed as 
an AC power source. Operate on battery power only.
Charger LED 
This LED illuminates when the amp is being 
charged. Once the battery is fully charged, this LED 
will dim and turn off. The battery requires 24-hours 
to be recharged properly.
Specifications
Type Combo
Speaker Configuration - (size / Power)
6-inch + tweeter / 15 Watts
Input Channels
2
Channel 1 - inputs
Combi (1/4-inch + XLR female)
Channel 2 - inputs
1/4-inch
Aux inputs 2x RCA
Master Controls
Bass, Low-Mid, Hi-Mid, Treble
LED Indicators
Power
Headphone Jack Yes
Other Features Rechargable battery (usage with full charge, 10-hours)
Input of charger: 120V 600mA
Output of charger: 15V 1500mA
Dimensions (DWH, inches)
10.25 x 13.75 x 11.75
Dimensions (DWH, cm)
260 x 345 x 300
Weight (lbs / kg)
25 / 11.32