3com S7906E Guide De Référence

 

1-18 

The latest configuration takes effect if you configure the value argument for multiple times in Ethernet 

interface view or port-group view. 

 

# Enable jumbo frames to pass through all the Ethernet interfaces in the manual port group named 

group1. 

<Sysname> system-view 

[Sysname] port-group manual group1 

[Sysname-port-group manual group1] group-member ethernet 2/0 

[Sysname-port-group manual group1] jumboframe enable 

# Enable jumbo frames to pass through Ethernet 2/0/1. 

<Sysname> system-view 

[Sysname] interface ethernet 2/0/1 

[Sysname-Ethernet2/0/1] jumboframe enable 

link-delay delay-time 

Ethernet interface view 

2: System level 

delay-time: Up/down suppression time for the physical connection of the Ethernet interface (in seconds), 

in the range 0 to 30. 

Use the link-delay command to configure the suppression time of physical-link-state changes on the 

Ethernet Interface. 

Use the undo link-delay command to restore the default suppression time. 

By default, the suppression time is 0 second, that is, the physical layer will report physical-link-state 

changes without delay. 

# Set the up/down suppression time of the physical connection of interface Ethernet 2/0/1 to 8 seconds. 

<Sysname> system-view