3com S7906E Guide De Référence

 

1-8 

Public instance PIM view, VPN instance PIM view 

2: System level 

priority: Priority of the C-BSR, in the range of 0 to 255. A larger value of this argument means a higher 

priority. 

Use the c-bsr priority command to configure the global C-BSR priority.  

Use the undo c-bsr priority command to restore the system default.  

By default, the C-BSR priority is 0.  

Related commands: c-bsr, c-bsr global, c-bsr group.  

# Set the global C-BSR priority to 5 in the public instance.  

<Sysname> system-view 

[Sysname] pim 

[Sysname-pim] c-bsr priority 5 

c-rp  interface-type interface-number [ group-policy acl-number |  priority  priority | holdtime 

hold-interval | advertisement-interval adv-interval ] * 

undo c-rp interface-type interface-number 

Public instance PIM view, VPN instance PIM view 

2: System level 

interface-type interface-number: Specifies an interface, the IP address of which will be advertised as a 

C-RP address.  

acl-number: Basic ACL number, in the range of 2000 to 2999. This ACL defines a range of multicast 

groups the C-RP is going to serve, rather than defining a filtering rule. Any group range matching the 

permit statement in the ACL will be advertised as an RP served group, while configurations matching 

other statements like deny will not take effect.  

priority: Priority of the C-RP, in the range of 0 to 255 and defaulting to 0. A larger value of this argument 

means a lower priority.