3com S7906E Guide De Référence

 

1-47 

interface interface-type interface-number: Specifies to reset the PIM control message counter on a 

particular interface. If no interface is specified, this command will clear the statistics information of PIM 

control messages on all interfaces.  

Use the reset pim control-message counters command to reset PIM control message counters.  

Note that if neither all-instance nor vpn-instance is specified, this command will reset PIM control 

message counters on the public instance. 

# Reset PIM control message counters on all interfaces in the public instance.  

<Sysname> reset pim control-message counters 

source-lifetime interval 

undo source-lifetime 

Public instance PIM view, VPN instance PIM view 

2: System level 

interval: Multicast source lifetime in seconds, with an effective range of 1 to 65,535.  

Use the source-lifetime command to configure the multicast source lifetime.  

Use the undo source-lifetime command to restore the system default.  

By default, the lifetime of a multicast source is 210 seconds.  

# Set the multicast source lifetime to 200 seconds in the public instance.  

<Sysname> system-view 

[Sysname] pim 

[Sysname-pim] source-lifetime 200 

source-policy acl-number 

undo source-policy