3com S7906E Guide De Référence

 

1-3 

interface-type interface-number: Port type and port number.  

to:  Specifies an interface range in the form of interface-type interface-number to interface-type 

interface-number, where the start interface number must be smaller than the end interface number. 

Note that both the start interface and the end interface are inclusive.  

Use the display link-aggregation member-port command to display the detailed link aggregation 

information of the specified interface(s) or all interfaces if no interface is specified. 

For an interface in a static aggregation group, only its port number and operational key are displayed, 

because it is not aware of the information of the partner. 

# Display the detailed link aggregation information of Ethernet 2/0/1, which is in a static aggregation 

group.  

<Sysname> display link-aggregation member-port ethernet 2/0/1 

 

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation, 

       D -- Synchronization, E -- Collecting, F -- Distributing, 

       G -- Defaulted, H -- Expired 

 

Ethernet2/0/1: 

Aggregation Interface: Bridge-Aggregation1 

Port Number: 1 

Oper-Key: 1 

# Display the detailed link aggregation information of Ethernet 2/0/2, which is in a dynamic aggregation 

group.  

<Sysname> display link-aggregation member-port ethernet 2/0/2 

 

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation, 

       D -- Synchronization, E -- Collecting, F -- Distributing, 

       G -- Defaulted, H -- Expired 

 

Ethernet2/0/2: 

Aggregation Interface: Bridge-Aggregation10 

Local: 

    Port Number: 2 

    Port Priority: 32768 

    Oper-Key: 2 

    Flag: {ACDEF} 

Remote: 

    System ID: 0x8000, 000f-e267-6c6a 

    Port Number: 26 

    Port Priority: 32768 

    Oper-Key: 2 

    Flag: {ACDEF}