3com S7906E Guide De Référence

 

1-5 

Any view 

1: Monitor level 

None 

Use the display link-aggregation summary command to display the summary information of all 

aggregation groups.  

You may find out that information about the remote system for a static link aggregation group is either 

replaced by none or not displayed at all. This is normal because this type of aggregation group is not 

aware of its partner. 

# Display the summary information of all aggregation groups.  

<Sysname> display link-aggregation summary 

 

Aggregation Interface Type: 

BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation 

Aggregation Mode: S -- Static, D -- Dynamic 

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing 

Actor System ID: 0x8000, 000f-e267-6c6a 

 

AGG         AGG       Partner ID               Select Unselect   Share 

Interface   Mode                               Ports  Ports      Type 

------------------------------------------------------------------------- 

BAGG1       S         none                     1      0          NonS 

BAGG10      D         0x8000, 000f-e267-57ad   2      0          Shar 

Table 1-3 display link-aggregation summary command output description 

Aggregation Interface Type 

Aggregate interface type:  

z 

BAGG for a Layer-2 aggregate interface 

z 

RAGG for a Layer-3 aggregate interface 

Aggregation Mode 

Aggregation group type:  

z 

S for static link aggregation 

z 

D for dynamic aggregation 

Loadsharing Type 

Loadsharing type:  

z 

Shar for load sharing 

z 

NonS for non-load sharing 

Actor System ID 

Local system ID 

AGG Interface 

Abbreviated name of the aggregate interface 

AGG Mode 

Aggregation group type