3com S7906E Guide De Référence

 

1-36 

route-policy-name: Route policy name, a string of 1 to 19 characters. 

Use the peer default-route-advertise command to advertise a default route to a peer/peer group. 

Use the undo peer default-route-advertise command to disable default route advertisement to a 

peer/peer group. 

By default, no default route is advertised to a peer/peer group. 

With this command used, the router unconditionally sends a default route with the next hop being itself 

to the peer/peer group regardless of whether the default route is available in the routing table. 

# In IPv4 MBGP address family view, advertise a default route to the existing peer group test. 

<Sysname> system-view 

[Sysname]bgp 100 

[Sysname-bgp]group test external 

[Sysname-bgp]peer test as-number 200 

[Sysname-bgp]ipv4-family multicast 

[Sysname-bgp-af-mul] peer test enable 

[Sysname-bgp-af-mul] peer test default-route-advertise 

peer { group-name | ip-address } enable 

undo peer { group-name | ip-address } enable 

IPv4 MBGP address family view 

2: System level 

group-name: Name of an IPv4 MBGP peer group, a string of 1 to 47 characters.  

ip-address: IP address of an IPv4 MBGP peer. 

Use the peer enable command to enable the specified peer/peer group that has been created in BGP 

view.  

Use the undo peer enable command to disable the specified peer/peer group that has been created in 

BGP view. 

If a peer is disabled, the router will not exchange routing information with the peer. 

# Enable the peer 18.10.0.9.