3com S7906E Guide De Référence

1-19

This command takes effect only if IGMP Snooping is enabled in the VLAN.

Related commands: igmp-snooping enable,

igmp-snooping querier,

igmp-snooping

max-response-time, max-response-time.

Examples

# Enable IGMP Snooping and set the interval between IGMP general queries to 20 seconds in VLAN 2.

<Sysname> system-view

[Sysname] igmp-snooping

[Sysname-igmp-snooping] quit

[Sysname] vlan 2

[Sysname-vlan2] igmp-snooping enable

[Sysname-vlan2] igmp-snooping query-interval 20

igmp-snooping router-aging-time

Syntax

igmp-snooping router-aging-time interval

undo igmp-snooping router-aging-time

View

VLAN view

Default Level

2: System level

Parameters

interval: Dynamic router port aging time, in seconds. The effective range is 1 to 1,000.

Description

Use the igmp-snooping router-aging-time command to configure the aging time of dynamic router

ports in the current VLAN.

Use the undo igmp-snooping router-aging-time command to restore the default setting.

By default, the aging time of dynamic router ports is 105 seconds.