3com S7906E Guide De Référence
1-20
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface2
Protocol: pim-dm, UpTime: 00:04:24, Expires: 00:02:47
Table 1-8 display pim ipv6 routing-table command output description
Field
Description
Total 0 (*, G) entry; 1 (S, G) entry
Number of (S, G) and (*, G) entries in the IPv6 PIM routing
table
table
(2001::2, FFE3::101)
An (S, G) entry in the IPv6 PIM routing table
Protocol
IPv6 PIM mode, IPv6 PIM-SM or IPv6 PIM-DM
Flag
Flag of the (S, G) or (*, G) entry in the IPv6 PIM routing
table
table
Uptime
Length of time since the (S, G) or (*, G) entry was installed
Upstream interface
Upstream (incoming) interface of the (S, G) or (*, G) entry
Upstream neighbor
Upstream neighbor of the (S, G) or (*, G) entry
RPF prime neighbor
RPF neighbor of the (S, G) or (*, G) entry
z
For a (*, G) entry, if this router is the RP, the RPF
neighbor of this (*, G) entry is NULL.
neighbor of this (*, G) entry is NULL.
z
For a (S, G) entry, if this router directly connects to the
IPv6 multicast source, the RPF neighbor of this (S, G)
entry is NULL.
IPv6 multicast source, the RPF neighbor of this (S, G)
entry is NULL.
Downstream interface(s) information
Information of the downstream interface(s), including:
z
Number of downstream interfaces
z
Downstream interface name
z
Protocol type configured on the downstream interface
z
Uptime of the downstream interface(s)
z
Expiry time of the downstream interface(s)
display pim ipv6 rp-info
Syntax
display pim ipv6 rp-info [ ipv6-group-address ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16 and FF0y::), where x and y represent any hexadecimal
number between 0 and F, inclusive. If you do not provide a group address, this command will display the
RP information corresponding to all IPv6 multicast groups.