3com S7906E Guide De Référence
1-13
Default Level
1: Monitor level
Parameters
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 characters.
|: Uses a regular expression to filter the output information. For details about regular expression, refer to
Basic System Configuration in the System Volume.
begin: Displays all lines starting with the line that matches the regular expression.
exclude: Displays all lines other than those matching the regular expression..
include: Displays all lines matching the regular expression.
regular-expression: Regular expression, a case-sensitive string of 1 to 80 characters.
Description
Use the display mpls ldp vpn-instance command to display information about a specified LDP
instance.
Related commands: mpls ldp (system view), mpls ldp (interface view).
Examples
# Display information about the LDP instance corresponding to VPN instance vpn1.
<Sysname> display mpls ldp vpn-instance vpn1
LDP Global Information
--------------------------------------------------------------------
Protocol Version : V1 Neighbor Liveness : 60 Sec
Graceful Restart : Off FT Reconnect Timer : 60 Sec
MTU Signaling : Off Recovery Timer : 60 Sec
LDP Instance Information
--------------------------------------------------------------------
Instance ID : 1 VPN-Instance : vpn1
Instance Status : Active LSR ID : 1.1.1.9
Hop Count Limit : 32 Path Vector Limit : 32
Loop Detection : Off
DU Re-advertise Timer : 30 Sec DU Re-advertise Flag : On
DU Explicit Request : Off Request Retry Flag : On
Label Distribution Mode : Ordered Label Retention Mode : Liberal
For description on the fields of the command output, see