3com S7906E Guide De Référence

 

1-3 

State 

Port state: active or standby 

Flush-count 

Number of transmitted flush messages 

Last-flush-time 

Time when the last flush message was transmitted (NA 
indicates that no flush message has been transmitted) 

 

flush enable [ control-vlan vlan-id ] 

undo flush enable 

Smart link group view 

2: System level 

control-vlan vlan-id: Specifies the control VLAN used for transmitting flush messages. The vlan-id 

argument ranges from 1 to 4094. If no VLAN is specified, VLAN 1 applies by default. 

Use the flush enable command to enable flush update.  

Use the undo flush enable command to disable flush update.  

By default, flush update is enabled for smart link groups and VLAN 1 is used for flush message 

transmission.  

Different smart link groups must be configured with different control VLANs.  

Related commands: smart-link flush enable.  

# Enable flush update for smart link group 1.  

<Sysname> system-view 

[Sysname] smart-link group 1 

[Sysname-smlk-group1] flush enable 

port interface-type interface-number { master | slave } 

undo port interface-type interface-number 

Smart link group view