3com S7906E Guide De Référence

 

2-11 

cpu: Redirects traffic to the CPU.  

interface  interface-type interface-number: Redirects traffic to an interface identified by its type and 

number.  

next-hop: Specifies the next hop to redirect the traffic to.  

ipv4-add: IPv4 address of the next hop.  

ipv6-add: IPv6 address of the next hop. The interface-type interface-number argument is a VLAN 

interface number. If the IPv6 address is a link-local address, you must specify a VLAN interface for the 

IPv6 address of the next hop; if the IPv6 address is not a link-local address, you need not specify a 

VLAN interface for the IPv6 address of the next hop. 

Use the redirect command to configure traffic redirecting action for a traffic behavior.  

Use the undo redirect command to remove the traffic redirecting action.  

Related commands: qos policy, traffic behavior, classifier behavior. 

# Configure the redirecting action to redirect traffic to GigabitEthernet2/0/1 port.  

<Sysname> system-view 

[Sysname] traffic behavior database 

[Sysname-behavior-database] redirect interface GigabitEthernet 2/0/1 

remark customer-vlan-id vlan-id-value 

undo remark customer-vlan-id 

Traffic behavior view 

2: System Level 

vlan-id-value: VLAN ID to be set for packets, in the range of 1 to 4094.  

Use the remark customer-vlan-id command to configure the action of setting the customer network 

VLAN ID for a traffic behavior.  

Use the undo remark customer-vlan-id command to remove the action of setting the customer 

network VLAN ID.  

Note that the action of setting the customer network VLAN ID cannot be applied to a VLAN or applied 

globally.