3com S7906E Guide De Référence

 

1-11 

None 

Use the dot1x multicast-trigger command to enable the multicast trigger function of 802.1X to send 

multicast trigger messages to the clients periodically. 

Use the undo dot1x multicast-trigger command to disable this function. 

By default, the multicast trigger function is enabled. 

Related commands: display dot1x. 

# Disable the multicast trigger function for interface GigabitEthernet2/0/1. 

<Sysname> system-view 

[Sysname] interface GigabitEthernet2/0/1 

[Sysname- GigabitEthernet2/0/1] undo dot1x multicast-trigger 

In system view: 

dot1x port-control { authorized-force | auto | unauthorized-force } [ interface interface-list ] 

undo dot1x port-control [ interface interface-list ] 

In Ethernet interface view: 

dot1x port-control { authorized-force | auto | unauthorized-force } 

undo dot1x port-control 

System view, Ethernet interface view 

2: System level 

authorized-force: Places the specified or all ports in the authorized state, allowing users of the ports to 

access the network without authentication. 

auto: Places the specified or all ports in the unauthorized state initially to allow only EAPOL frames to 

pass, and turns the ports into the authorized state to allow access to the network after the users pass 

authentication. This is the most common choice. 

unauthorized-force: Places the specified or all ports in the unauthorized state, denying any access 

requests from users of the ports. 

interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The 

interface-list argument is in the format of interface-list = { interface-type  interface-number [ to 

interface-type  interface-number ] } & <1-10>, where interface-type represents the port type, 

interface-number represents the port number, and & <1-10> means that you can provide up to 10 port