3com S7906E Guide De Référence

 

1-11 

# Set the NTK mode of port GigabitEthernet 2/0/1 to ntkonly, allowing the port to forward received 

packets to only devices passing authentication. 

<Sysname> system-view 

[Sysname] interface gigabitethernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] port-security ntk-mode ntkonly 

port-security oui oui-value index index-value 

undo port-security oui index index-value 

System view 

2: System level 

oui-value: Organizationally unique identifier (OUI) string, a 48-bit MAC address in the H-H-H format. 

The system automatically uses only the 24 high-order bits as the OUI value. 

index-value: OUI index, in the range 1 to 16. 

Use the port-security oui command to configure an OUI value for user authentication. This value is 

used when the port security mode is UserLoginWithOUI. 

Use the undo port-security oui command to delete an OUI value with the specified OUI index.  

By default, no OUI value is configured.  

Note that an OUI value configured by using the port-security oui command takes effect only when the 

security mode is userLoginWithOUI. 

Related commands: display port-security. 

# Configure an OUI value of 000d2a, setting the index to 4.  

<Sysname> system-view 

[Sysname] port-security oui 000d-2a10-0033 index 4 

port-security port-mode { autolearn  | mac-authentication | mac-else-userlogin-secure | 

mac-else-userlogin-secure-ext  | secure | userlogin |  userlogin-secure  | userlogin-secure-ext | 

userlogin-secure-or-mac | userlogin-secure-or-mac-ext | userlogin-withoui }