3com S7906E Guide De Référence

 

1-3 

Line protocol current state 

The link layer protocol state of a VLAN interface, which can be 
one of the following:  

z 

DOWN: The protocol state of this VLAN interface is down, 
usually because no IP address is configured. 

z 

UP: The protocol state of this VLAN interface is up. 

Description 

The description string of a VLAN interface 

The Maximum Transmit Unit 

The MTU of a VLAN interface 

Internet protocol processing : 

IP packets processing ability. Disabled indicates that the interface 
is not configured with an IP address.  

IP Packet Frame Type 

IPv4 outgoing frame format 

Hardware address 

MAC address corresponding to a VLAN interface 

IPv6 Packet Frame Type 

IPv6 outgoing frame format 

 

display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ] 

Any view 

1: Monitor level 

vlan-id1: Displays the information of a VLAN specified by VLAN ID in the range of 1 to 4094. 

vlan-id1 to vlan-id2: Displays the information of a range of VLANs specified by a VLAN ID range. 

all: Displays all current VLAN information except for the reserved VLANs. 

dynamic: Displays the number of dynamic VLANs and the ID of each dynamic VLAN. Dynamic VLANs 

refer to VLANs that are generated through GVRP or those distributed by a RADIUS server.  

reserved: Displays information of the reserved VLANs. Protocol modules determine reserved VLANs 

according to function implementation, and reserved VLANs serve protocol modules. You cannot do any 

operation on reserved VLANs. 

static: Displays the number of static VLANs and the ID of each static VLAN. Static VLANs refer to 

VLANs manually created. 

Use the display vlan command to display VLAN information. 

Related commands: vlan. 

# Display VLAN 2 information.