3com S7906E Guide De Référence
1-14
display transceiver alarm
Syntax
display transceiver alarm interface [ interface-type interface-number ]
View
Any view
Default Level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays the current alarm information of the pluggable
transceiver plugged in the specified interface. interface-type interface-number represents interface type
and interface number. If it is not specified, the command displays the current alarm information of the
pluggable transceiver in all the interfaces.
Description
Use the display transceiver alarm command to display the current alarm information of a single or all
transceivers.
If no error occurs, None is displayed.
shows the alarm information that may occur for the four types of commonly used transceivers.
Table 1-5 display transceiver alarm command output description
Field
Remarks
GBIC/SFP
RX loss of signal
Incoming (RX) signal is lost.
RX power high
Incoming (RX) power level is high.
RX power low
Incoming (RX) power level is low.
TX fault
Transmit (TX) fault
TX bias high
TX bias current is high.
TX bias low
TX bias current is low.
TX power high
TX power is high.
TX power low
TX power is low.
Temp high
Temperature is high.
Temp low
Temperature is low.
Voltage high
Voltage is high.
Voltage low
Voltage is low.
Transceiver info I/O error
Transceiver information read and write error
Transceiver info checksum error
Transceiver information checksum error
Transceiver type and port configuration
mismatch
mismatch
Transceiver type does not match port
configuration.
configuration.