3com S7906E Guide De Référence

 

1-25 

At present, the AppleTalk-based protocol template cannot be associated with a port on an S7900E 

series Ethernet switch. 

 

Related commands: display protocol-vlan interface. 

# Associate the hybrid port GigabitEthernet 2/0/1 with protocol 0 in VLAN 2. 

<Sysname> system-view 

[Sysname] vlan 2 

[Sysname-Vlan2] protocol-vlan ipv4 

[Sysname-Vlan2] quit 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] port link-type hybrid 

[Sysname-GigabitEthernet2/0/1] port hybrid vlan 2 untagged 

 Please wait... Done 

[Sysname-GigabitEthernet2/0/1] port hybrid protocol-vlan vlan 2 0 

# Associate the hybrid Layer-2 aggregate interface Bridge-aggregation 1 with protocol 0 in VLAN 2, 

assuming that Bridge-aggregation 1 does not have member ports. 

<Sysname> system-view 

[Sysname] vlan 2 

[Sysname-Vlan2] protocol-vlan ipv4 

[Sysname-Vlan2] quit 

[Sysname] interface bridge-aggregation 1 

[Sysname-Bridge-Aggregation1] port link-type hybrid 

[Sysname-Bridge-Aggregation1] port hybrid vlan 2 untagged 

 Please wait... Done 

[Sysname-Bridge-Aggregation1] port hybrid protocol-vlan vlan 2 0 

# Associate the hybrid Layer-2 aggregate interface Bridge-aggregation 1 with protocol 0 in VLAN 2. 

Among the member ports of the aggregation group corresponding to Bridge-aggregation 1, Ethernet 

6/0/2 is an access port and Ethernet 6/0/3 is a trunk port.  

<Sysname> system-view 

[Sysname] vlan 2 

[Sysname-Vlan2] protocol-vlan ipv4 

[Sysname-Vlan2] quit 

[Sysname] interface bridge-aggregation 1 

[Sysname-Bridge-Aggregation2] port link-type access 

 Please wait... Done. 

 Configuring GigabitEthernet2/0/1... Done. 

 Configuring GigabitEthernet2/0/1............................... Done. 

[Sysname-Bridge-Aggregation1] port link-type hybrid 

[Sysname-Bridge-Aggregation1] port hybrid vlan 2 untagged 

 Please wait... Done. 

 Configuring GigabitEthernet2/0/1... Done.