3com S7906E Guide De Référence

 

1-12 

None 

Use the info-center enable command to enable information center. 

Use the undo info-center enable command to disable the information center. 

The system outputs information to the log host or the console only after the information center is 

enabled first. 

By default, the information center is enabled. 

# Enable the information center. 

<Sysname> system-view 

[Sysname] info-center enable 

% Information center is enabled 

info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ] * 

undo info-center logbuffer [ channel | size ] 

System view 

2: System level 

channel-number: A specified channel number, in the range 0 to 9. 

channel-name: Specifies a channel name, which could be a default name or a self-defined name. The 

user needs to specify a channel name first before using it as a self-defined channel name. For more 

information, refer to the info-center channel name command. 

buffersize: Specifies the maximum number of log messages that can be stored in a log buffer, in the 

range 0 to 1,024 with 512 as the default value. 

Use the info-center logbuffer command to enable information output to a log buffer and set the 

corresponding parameters. 

Use the undo info-center logbuffer command to disable information output to a log buffer. 

By default, information is output to the log buffer with the default channel of channel 4 (logbuffer) and 

the default buffer size of 512. 

Note that the info-center logbuffer command takes effect only after the information center is enabled 

with the info-center enable command.