3com S7906E Guide De Référence

 

1-30 

VLAN view 

2: System level 

ip-subnet-index: Beginning IP subnet Index, in the range of 0 to 11. This value can be configured by 

users, or automatically numbered by system based on the order in which the IP subnets or IP addresses 

are associated with the VLAN. 

ip  ip-address  [mask]: Specifies the source IP address or network address based on which the 

subnet-based VLANs are classified, in dotted decimal notation. The mask argument is the subnet mask 

of the source IP address or network address, in dotted decimal notation with a default value of 

255.255.255.0. 

to: Specifies an IP subnet index range. 

ip-subnet-end: End IP subnet index, in the range of 0 to 11. This argument must be greater than or equal 

to the beginning IP subnet index. 

all: Removes all the associations between VLANs and IP subnets or IP addresses. 

Use the ip-subnet-vlan  command to associate the current VLAN with a specified IP subnet or IP 

address.  

Use the undo ip-subnet-vlan command to remove the association. 

Note that the IP subnet or IP address cannot be a multicast network segment or a multicast address. 

Related commands: display ip-subnet-vlan vlan. 

# Configure VLAN 3 as an IP subnet-based VLAN and associate it with the 192.168.1.0/24 network 

segment. 

<Sysname> system-view 

[Sysname] vlan 3 

[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0 

port hybrid ip-subnet-vlan vlan vlan-id  

undo port hybrid ip-subnet-vlan { vlan vlan-id | all } 

Ethernet interface view, port group view, Layer-2 aggregate interface view 

2: System level