3com S7906E Guide De Référence

 

1-2 

Current patch number 

Total number of the current patches 

Running patch number 

Number of running patches 

Active patch number 

Number of active patches 

 

patch active patch-number [ slave | slot slot-number ] 

System view 

3: Manage level 

patch-number: Sequence number of a patch. The valid values of this argument depend on the patch file 

used. 

slave: Specifies the standby main board.  

slot slot-number: Specifies a board by its slot number. The value range of this argument varies with the 

device model. 

Use the patch active command to activate the specified patch, namely, the system will run the patch. 

After you execute the command, all the DEACTIVE patches before the specified patch number are 

activated. 

Note that: 

z 

The command is not applicable to patches in the DEACTIVE state. 

z 

After a system reboot, the original ACTIVE patches change to DEACTIVE and become invalid. To 

make them effective, you need to activate them again. 

If you execute this command without specifying slave or slot-number, the command activates the 

specified patches on the active main board. 

# Activate patch 3 and all the DEACTIVE patches before patch 3 on the standby main board. 

<Sysname> system-view 

[Sysname] patch active 3 slave 

patch deactive patch-number [ slave | slot slot-number ]