3com S7906E Guide De Référence

 

3-14 

The system generates an error frame seconds summary alarm when the number of error frame 

seconds (in an error frame second, at least one error frame occurs) in a specific time period (for 

example, 1 minute) exceeds the corresponding predefined threshold. 

Related commands: alarm oam error-frame-seconds-summary enable.  

 

The commands here take effect only for OAM 2.0 and above.  

 

# Set the window size and alarm threshold for error frame seconds summary to 800 and 2 on ONU 

1/0/1:1.  

<Sysname> system-view 

[Sysname] interface onu 1/0/1:1 

[Sysname-Onu1/0/1:1] alarm oam error-frame-seconds-summary window 800 threshold 2 

OLT port view, ONU port view, FTTH view 

2: System level 

None 

Use the alarm oam error-frame-seconds-summary enable command to enable the error frame 

seconds summary alarm. 

Use the undo alarm oam error-frame-seconds-summary enable command to disable the error 

frame seconds summary alarm. 

By default, the error frame seconds summary alarm is enabled.